How to Exit Recovery Mode on iPhone 6S or 6 – Three Simple Ways

Method 1: Exiting Recovery Mode using the Power Button

If you are experiencing a Recovery Mode issue with your iPhone 6S or 6, the first method you should try is to exit Recovery Mode using the power button. This method is useful if your iPhone was working fine before, and you don’t want to use a computer to resolve the issue.To exit Recovery Mode using the power button, you need to follow these simple steps:Step 1 – Hold down the power button:First, you need to hold down the Power button on your iPhone. This button is located on the right side of the iPhone 6S or 6.Step 2 – Release the power button:Once you have held down the power button for a few seconds, release it until the screen goes black.Step 3 – Wait for the Apple logo:After you release the power button, wait for the Apple logo to appear on your iPhone screen.Step 4 – Wait for your iPhone to turn on:After the Apple logo appears, wait for your iPhone to fully turn on. Once it’s done, it should be out of Recovery Mode, and you can use your iPhone as usual.It’s important to note that this method does not erase any data on your iPhone. Therefore, you don’t need to worry about losing any data while using this method.However, if this method does not work, you need to try the other methods described in this article. These methods require a computer and might erase some of your data. Therefore, make sure to back up your data before trying these methods. In the next chapter, we will discuss the second method, which is resolving the Recovery Mode issue using iTunes.

Method 2: Exiting Recovery Mode using iTunes

If your iPhone is still stuck in Recovery Mode even after trying the first method, you can resort to using iTunes. This method involves connecting your device to a computer and using iTunes to restore it to its previous state. To start with, launch iTunes on your computer. If you don’t have iTunes installed, download and install it from the Apple website before proceeding. Once you have installed iTunes, connect your iPhone to your computer using a USB cable. iTunes will automatically detect your device and display a notification message saying, “iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.” Click on the “OK” button, and you will be taken to the iPhone Recovery Mode screen in iTunes. The screen will show you two options: to update or to restore your iPhone. If you choose the “Update” option, iTunes will download and install the latest iOS version on your device. This process will not delete any of your data from your iPhone. However, if you choose “Restore,” your iPhone will be restored to its original factory settings, erasing all the data on your device. If you opt to update your iPhone, iTunes will download the latest iOS firmware for your device and install it. This update process may take some time depending on the size of the update and the speed of your internet connection. Once the update is complete, your iPhone will restart automatically, and the Recovery Mode screen should disappear. If your device still shows the Recovery Mode screen, try using a different USB cable or port.If the update process fails or gets stuck, you can try putting your iPhone into DFU (Device Firmware Update) mode. DFU mode allows you to restore your device from any state, including Recovery Mode. To enter DFU mode on an iPhone 6S or 6, follow these steps:1. Connect your iPhone to your computer using a USB cable and open iTunes.
2. Press and hold the Power and Home buttons simultaneously for about 10 seconds.
3. Release the Power button while still holding the Home button. Your iPhone should now be in DFU mode.If your iPhone’s display is completely black, it means you have successfully entered DFU mode. iTunes will detect your device in DFU mode and give you the option to restore your iPhone. Click on “Restore iPhone,” and iTunes will download and install the latest iOS firmware on your device. However, just like the restore option in the previous method, this process will erase all the data on your iPhone. To sum up, if your iPhone is stuck in Recovery Mode, don’t panic. There are several ways to fix this issue, and using iTunes is one of them. If the first method of using the power button fails, you can try updating your iPhone using iTunes or putting your device in DFU mode. However, keep in mind that both of these methods will require you to connect your iPhone to a computer and may result in data loss. Make sure you have a backup of your data before attempting any of these methods. If none of these methods work, it’s recommended to take your iPhone to a nearby Apple store or contact Apple Support for further assistance.

Method 3: Exiting Recovery Mode using Tenorshare Reiboot

When your iPhone gets stuck in Recovery Mode and the earlier methods fail to work, the best option is to use Tenorshare Reiboot, a software that can easily exit Recovery Mode. To use this method, you need a PC with the Tenorshare Reiboot software installed on it and a USB cable to connect your iPhone to the PC.Step 1: Download and install Tenorshare Reiboot on your PC. After installation, launch the program and connect your iPhone to the PC using the USB cable.Step 2: On the home screen, you will see the option “Exit Recovery Mode”. Click on it, and the software will start repairing the iOS system.Step 3: Wait for a few minutes while the software repairs the system. You will get a notification that your device has exited Recovery Mode successfully.Using Tenorshare Reiboot is a safe and easy way to exit Recovery Mode without losing your data. It also helps if your device is stuck on the Apple logo or in a boot loop. It is important to note that using Tenorshare Reiboot is a free option, but the paid version comes with additional features like system repair, backup and restore, and more.Conclusion:
Experiencing Recovery Mode on your iPhone can be frustrating, but thankfully there are several methods to get your iPhone back to normal. Using Tenorshare Reiboot is one of the easiest and most effective ways to exit Recovery Mode without the risk of data loss. If none of the above methods work, it may be time to consider seeking professional help from an Apple repair store or contacting Apple Support.

What to do when none of the methods work

If you have tried all three methods mentioned above and still could not exit the Recovery Mode, do not worry as there are still other options you can try before taking your iPhone to a repair store. Before trying any of these methods, disconnect your phone from your computer and make sure it is turned off.

The first thing you can try is to drain the battery of your iPhone. Leave your phone turned off and let it sit for a few hours until the battery runs out. Once the battery is completely drained, connect your iPhone to a power source and turn it on. This might help your phone exit the Recovery Mode and start functioning normally once again.

If draining the battery did not work, try resetting your iPhone by holding the Power and Home buttons simultaneously for about 10 seconds. Release the buttons once the Apple logo appears on the screen. This should help your iPhone reboot and exit the Recovery Mode.

Another option you can try is to take out and reinsert the SIM card. This method has worked for some users who were stuck in the Recovery Mode. Make sure you turn off your iPhone before doing this. Locate the SIM card slot on your iPhone and use a paper clip or SIM ejector tool to take the SIM card out. Wait for a few seconds and put the SIM card back carefully. Turn on your phone and see if it’s still stuck in the Recovery Mode.

If none of the above methods have worked, you may want to restore your iPhone using DFU mode. DFU mode (Device Firmware Update) is a more advanced version of Recovery mode. This method has worked for several iPhone users who were unable to exit Recovery Mode. To enter DFU mode, connect your iPhone to your computer and open iTunes. Hold down the Power and Home buttons together for about 10 seconds, then release the Power button while continuing to hold the Home button for an additional 10 seconds. If your iPhone’s display turns black, it means you have successfully entered DFU mode. iTunes will prompt you to either restore or update your phone. Choose restore, and iTunes will download the latest iOS and install it on your iPhone, which should help it exit the Recovery Mode. Please note that restoring your iPhone using DFU mode will erase all your data on your device.

If none of the above methods have worked, it’s best to contact Apple Support or visit your nearest Apple repair store for assistance. They have the right tools and expertise to diagnose and fix any hardware issues with your iPhone.

In conclusion, the Recovery Mode issue on iPhone 6S or 6 can be frustrating, but there are several methods you can try to exit the Recovery Mode and get your phone back to normal. From simple methods like resetting your iPhone to draining the battery, and from using iTunes to Tenorshare Reiboot, we have explored different solutions to help you solve this problem. If none of these methods work, it might be time to seek professional help from Apple Support or an authorized repair store.